Process Essays (Examples)(Examples)
Study Document
Agency Theory And The Limitations Of Representative Government
The Political Nature of the Federal Budget Process
Introduction
The federal budget process is overseen by US Congressmen, who are fundamentally immersed in the political nature of government. As Elwood (2008) notes, members of Congress are … the votes necessary for reelection; and 3) by obtaining expert advice on topics that are of personal importance to them. The federal budget process is particularly impactful on the first two and vice versa. For example, “the ability to funnel money into a congressional district or state … a legislator to remain in office” (Elwood, 2008, p. 3). This ability creates a conflict of interest among the politicians overseeing the budget process. On the one hand they are tasked with producing a budget resolution and allocating funds based on the duty to serve the collective … ways that will benefit them, their political career and their political cronies. This paper will discuss the……
References
References
Eisenhardt, K. M. (1989). Agency theory: An assessment and review. Academy of management review, 14(1), 57-74.
Elwood, T. W. (2008). Politics of the US Federal Budget Process. International quarterly of community health education, 28(1), 3-12.
Jennings, M. (2008). Business Ethics: Case Studies and Selected Readings. Cengage.
Machold, S., Ahmed, P.K., & Farquhar, S.S. (2007). Corporate Governance and Ethics: A Feminist Perspective. Journal of Business Ethics (2008) 81:665-678.
ProActive Solutions. (2020). Agency theory. Retrieved from http://knowledgegrab.com/learners-zone/study-support/performance-management-review/framework-introduction-to-hrm/agency-theory/
Study Document
MacBook Pro By Apple Inc Quality Management
… Summary
Quality management is pivotal in any product or service. One of the key aspects of ensuring this is through the product development process. The product taken into account is MacBook Pro by Apple Inc. Research indicates that the product goes through various steps in the production … The product taken into account is MacBook Pro by Apple Inc. Research indicates that the product goes through various steps in the production process, including designing, the formation of a new product team, Apple New product Process, product review, product redesign, assessment and feedback, and then finally product launching. Research also indicates that designing for manufacturing is a pivotal component … designing for manufacturing is a pivotal component of the product development cycle. It encompasses the optimization of the product's design for the different processes of manufacturing and assembly, assimilating the various product design needs and requirements with its production approach.……
References
References
Hill, C. W., Jones, G. R., & Schilling, M. A. (2014). Strategic management: theory: an integrated approach. Cengage Learning.
Panzarino, M. (2012). This is how Apple\\\\\\'s top-secret product development process works. The Next Web. Retrieved from: https://thenextweb.com/apple/2012/01/24/this-is-how-apples-top-secret-product-development-process-works/
Interaction Design Foundation. (2020). Apple\\\\\\'s Product Development Process – Inside the World\\\\\\'s Greatest Design Organization. Retrieved from: https://www.interaction-design.org/literature/article/apple-s-product-development-process-inside-the-world-s-greatest-design-organizatio " target="_blank" REL="NOFOLLOW">
Study Document
Manufacturing Systems In Automotive Industry
… the contemporary automotive manufacturing systems and automotive industries is automation. An automated manufacturing system alludes to an intersected or interrelated system of material processing stations with the capability of automatically processing an extensive range of part types simultaneously under computer control. Imperatively, the system is not just interlinked by a material transport system but … system but also interconnected by a communication network for assimilating all aspects of manufacturing. This sort of system portrays flexibility in handling, routing, processes, and changing of tools. Also, an automated manufacturing system demonstrates key features, including a high magnitude of automation, integration, and flexibility (Swamidass, 2000). … in Automotive Industry
A manufacturing system is delineated as a set of integrated equipment and human resources that carry out one or more processing as well as assembly processes on a starting work material, components, or set of components. The integrated equipment comprises of production machines,……
References
References
Boone, L. E., Kurtz, D. L., & Khan, M. H. (2009). Contemporary business. Hoboken: John Wiley & Sons.
Chui, M., George, K., Manyika, J., Miremadi, M. (September 2017). Human + machine: A new era of automation in manufacturing. McKinsey & Company.
Deng, W., Luo, Q. (2012). Advanced Technology for Manufacturing Systems and Industry. New York: Pearson.
Groover, M. P. (2007). Fundamentals of modern manufacturing: materials processes, and systems. John Wiley & Sons.
HR Cloud. (2020). HR Automation - The Future of Human Resource Process Management. Retrieved from: https://kissflow.com/hr-process/
Joshi, V., Adhikari, M. S., Patel, R., Singh, R., Gehlot, A. (2018). Industrial Automation: Learn the current and leading-edge research on SCADA Automation. New Delhi: Pearson.
Krar, S. F., & Gill, A. (2003). Exploring advanced manufacturing technologies. Industrial Press, Inc.
Ladet, P., & Vernadat, F. (Eds.). (2013). Integrated manufacturing systems engineering. Springer.
Study Document
CEOs And Presidents
Influence Practices of Elon Musk and Jeff Skilling
CEOs and Presidents
Abstract
This paper looks at the influence processes of three CEOs: Elon Musk of Tesla, Alex Gorsky of Johnson & Johnson, and Jeff Skilling of Enron. These leaders have various strengths … seen a string of successes and failures during the course of his tenure as head of Tesla. This paper discusses their various influence processes, analyzes their strengths and weaknesses and summarizes their key attributes that effect positive organizational change and improved performance.
Introduction to the Concept of … their strengths and weaknesses and summarizes their key attributes that effect positive organizational change and improved performance.
Introduction to the Concept of Influence Processes
The concept of influence processes is that it is an action a leader takes to have an impact on followers immediately and the organization overall. Lunenburg (2012) states … a leader takes to have an……
References
References
Bromley, H. R. (2007). Are you a transformational leader?. Physician Executive, 33(6), 54.
Brown, M. E., & Treviño, L. K. (2014). Do role models matter? An investigation of role modeling as an antecedent of perceived ethical leadership. Journal of Business Ethics, 122(4), 587-598.
Chamers, M.M. (2014). An Integrative Theory of Leadership (4thed.). New York, NY: Psychology Press.
De Vries, M.F.K. (1998). Charisma in action: The transformational abilities of Virgin's Richard Branson and ABB's Percy Barnevik. Organizational Dynamics, 26(3), 7-21.
Healthcare Technology Report. (2019). Alex Gorsky is the all-American CEO. Retrieved from https://thehealthcaretechnologyreport.com/alex-gorsky-is-the-all-american-ceo/
Holmes, A. (2007). Ethics: Approaching moral decisions. Downers Grove, IL: InterVarsity Press.
Kameda, T., Ohtsubo, Y., & Takezawa, M. (1997). Centrality in sociocognitive networks and social influence: An illustration in a group decision-making context. Journal of personality and social psychology, 73(2), 296.
Kolodny, L. (2018). Elon Musk’s extreme micromanagement has wasted time and money at Tesla, insiders say. Retrieved from https://www.cnbc.com/2018/10/19/tesla-ceo-elon-musk-extreme-micro-manager.html
Study Document
Quality Improvement Plan
… come up with meaningful and innovative outputs that will be suitable to the customer. Using the COPIS model, the department can transform the process by focusing on what the customer would be delighted with (Brown, 2019). This way the department will then consider the new outputs that … customer satisfaction since the focus will shift to the customer. This allows the department to have an outside-in approach of looking at a process from the customer's perspective.
Approaches to Customer Service
Customer service approaches include focusing on customer retention, detail-oriented support, and meeting the customers where … than in trying to acquire new customers.
Output-Control and Measurement
With the aim of reducing customer complaints, the department can make use of process effectiveness measurement. This measurement will measure the performance of a process to a specified customer requirement, which in our case is reducing customer complaints. It is stated that every……
References
References
Brown, C. (2019). Why and how to employ the SIPOC model. Journal of business continuity & emergency planning, 12(3), 198-210.
Carvalho, M. S., Magalhaes, D. S., Varela, M. L., Sa, J. O., & Gonçalves, I. (2016). Definition of a collaborative working model to the logistics area using design for Six Sigma. International Journal of Quality & Reliability Management, 33(4), 465-475.
Shojaie, A. A., Raissi, S., & Dogahe, R. A. (2016). Impact analysis of TQM\\\\\\'s hard aspects on sigma level in electronics and telecommunication production process. International Journal of Productivity and Quality Management, 18(4), 425-439.
Study Document
Recruitment And Retention Human Resource Policies
… hiring and employee compliance for the current post, the H.R. department will first seek to ensure there cannot be any discrimination in the process based on religion, race, color, age, sex, sexual orientation, disability, and ethnicity (Patterson & Zibarras, 2018). To achieve this, the recruitment process will not ask some questions, especially in the pre-employment interview, and there shall be the same legal requirements for hiring. At the federal … pose potential legal trouble and how to avoid them. Also, the H.R. department will review state laws to ensure compliance.
Moreover, the recruitment process must ensure no employee misclassification, and there is compliance with exempt and non-exempt status. Misclassification of employees attracts highly punitive fines from the … individualistic behaviors and descriptions and organizational operations and systems. Being open to alternative ways and approaches to a task or issue, revising work processes, and being flexible in design and schedule……
References
References
Arthur, D. (2012). Recruiting, interviewing, selecting & orienting new employees. AMACOM Div American Mgmt Assn.
Avery, D. R., McKay, P. F., & Volpone, S. D. (2013). \\\\\\"Diversity staffing: Inclusive personnel recruitment and selection practices.\\\\\\" In Q. M. Roberson (Ed.), Oxford library of psychology. The Oxford handbook of diversity and work (p. 282–299). Oxford University Press.
Becker, W. J., Connolly, T., & Slaughter, J. E. (2010). The effect of job offer timing on offer acceptance, performance, and turnover. Personnel Psychology, 63(1), 223-241.
Breaugh, J. (2016). Talent acquisition: A guide to understanding and managing the recruitment process. Society of Human Resource Management.
Compton, R. L. (2009). Effective recruitment and selection practices. CCH Australia Limited.
Flynn, W. J., Mathis, R. L., Jackson, J. H., & Valentine, S. R. (2016). Healthcare human resource management, 3rd Edition. Cengage Learning, U.S.
Garner, E. (2012). Recruitment and Selection. Bookboon.
Gusdorf, M. L. (2008). Recruitment and Selection: Hiring the right person. USA: Society for Human Resource Management.
Study Document
Data Security Using RFID Bands At Music Festivals
…
There are chances that industry revenues increase with improved customer experience as time reduction and standing in line are eliminated from all the processes at the event and integration of social media activities with the attendees' check-in function, enabling the event's enhanced promotion value-added marketing potential.
Description … enabling the event's enhanced promotion value-added marketing potential.
Description of Five or More Types of Personal/Private Information Data That Will Be Collected, Stored, Processed With the Use Case
The type of data collected and stored on the RFID wrist bands would be attendees' Facebook and Twitter accounts … the information is quickly accessed with a beep of the band on the scanner, and waiting in lines would be eradicated from the process. The wrist bands are secured with a unique key to unlock the user profiles, such as social media profiles, that have an added … to be handled following the……
References
References
Event Tribe. (n.a.). The top 10 benefits of using RFID for events. Retrieved from https://www.eventbrite.com/blog/academy/the-top-10-benefits-of-using-rfid-for-events/
ID&C. (n.a.). How to RFID wristbands work? Retrieved from https://www.idcband.com/blog/how-do-rfid-wristbands-work/
Kacicki, T. (2019, July 15). 4 commonly overlooked facts about RFID wristbands. Intellitix. Retrieved from https://intellitix.com/hub/four-commonly-overlooked-facts-rfid
OECD. (2008). OECD policy guideline on RFID. https://www.oecd.org/sti/ieconomy/40892347.pdf
Quirk, R.E. & Borrello, S.J. (2005). RFID: Rapid deployment and regulatory challenges. Retrieved from https://www.pharmamanufacturing.com/assets/Media/MediaManager/VenableRFIDpaper.pdf?SESSID=62935cf41f5a19909f5bb3ae3a598490
Williamson, A., Tsay, L., Kateeb, I.A. & Burton, L. (2013). Solutions for RFID smart tagged card security vulnerabilities. AASRI Procedia, 4, 282-287. DOI: 10.1016/j.aasri.2013.10.042
Study Document
Clinical Informatics
… an information search in a database, they may get a return of a thousand different references or sources of information. If they cannot process that information and appraise it well, their ability to conduct a search will be meaningless. Thus, informatics is more than just about knowing … (Westra et al., 2017). It appears to be the case that as technological advances are made, the need to be able to handle, process, interact with, command, and drive informational technology resources has grown—and nowhere is that seen more than in health care.
Informatics, EBP and the … records are reached, suggesting that the patient is at risk (Kharbanda et al., 2018).
EMR-linked clinical decision support can also facilitate the decision process for ordering diagnostic testing for patients. Too much testing can be a waste of time, energy and resources and it can cause strain … the right diagnostic tests from……
References
References
Cho, O. M., Kim, H., Lee, Y. W., & Cho, I. (2016). Clinical alarms in intensive care units: Perceived obstacles of alarm management and alarm fatigue in nurses. Healthcare informatics research, 22(1), 46-53.
Effken, J., Weaver, C., Cochran, K., Androwich, I., & O’Brien, A. (2016). Toward a central repository for sharing nursing informatics’ best practices. CIN: Computers, Informatics, Nursing, 34(6), 245-246.
Elsayed, W. A., Hussein, F. M., & Othman, W. N. (2017). Relation between nursing informatics competency and nurses’ attitude toward evidence-based practice among qualified nurses at Mansoura Oncology Center. International Journal of Nursing Didactics, 7(6), 26-33.
Drolet, B. C., Marwaha, J. S., Hyatt, B., Blazar, P. E., & Lifchez, S. D. (2017). Electronic communication of protected health information: privacy, security, and HIPAA compliance. The Journal of hand surgery, 42(6), 411-416.
Haupeltshofer, A., Egerer, V., & Seeling, S. (2020). Promoting health literacy: What potential does nursing informatics offer to support older adults in the use of technology? A scoping review. Health Informatics Journal, 1460458220933417.
Kharbanda, E. O., Asche, S. E., Sinaiko, A. R., Ekstrom, H. L., Nordin, J. D., Sherwood, N. E., & O’Connor, P. (2018). Clinical decision support for recognition and management of hypertension: a randomized trial. Pediatrics, 141(2).
Khezri, H., & Abdekhoda, M. (2019). Assessing nurses’ informatics competency and identifying its related factors. Journal of Research in Nursing, 24(7), 529-538.
Kleib, M., & Nagle, L. (2018). Factors associated with Canadian nurses\\\\\\\\\\\\' informatics competency. CIN: Computers, Informatics, Nursing, 36(8), 406-415.
Study Document
Assessment Activity Language Assessment
… identification of pupils who require specific services. For deaf and hard hearing learners, participating in meaningful education tests is a multifaceted and complex process (Pizzo & Chilvers, 2019). Assessments that are done well will support growth and learning, while poorly and inaccurately designed assessments have the potential ……
References
References
Bond, L. A. (1996). Norm-and criterion-referenced testing. Practical Assessment, Research, and Evaluation, 5(1), 2.
Carrow-Woolfolk, E. (2014). Test for auditory comprehension of language (4th ed.). Austin, TX: PRO-ED.
Carrow-Woolfolk, E., & Allen, E. A. (2014). TEXL: Test of expressive language. Austin, TX: PRO-ED.
Fudala, J.B. & Stegall, S. (2017). Arizona-4: Arizona Articulation and Phonology Scale, Fourth Revision. Western Psychological Services.
Fudala, J.B. (2000). Arizona Articulation Proficiency Scale (3rd ed.). Los Angeles, CA: Western Psychological Services.
Haug, T. (2005). Review of sign language assessment instruments. Sign Language & Linguistics, 8(1-2), 61-98.
Maller, S., Singleton, J., Supalla, S., & Wix, T. (1999). The development and psychometric properties of the American Sign Language Proficiency Assessment (ASL-PA). Journal of Deaf Studies and Deaf Education, 4(4), 249-269.
Pizzo, L., & Chilvers, A. (2019). Assessment of Language and Literacy in Children Who Are d/Deaf and Hard of Hearing. Education Sciences, 9(3), 223.
Study Document
Adolescent Psychosocial Assessment
… Person-In-Environment (PIE).
Social Learning Theory
According to Bandura, a crititcal element of human learning occurs through imitation. Of course, imitation involves some cognitive processes. A lot of information is gained when we simply look at models. W consequently code what we see on our minds. The model … model by Bandura provides deep insights into learning by imitation. Broadly, one of the basic and rather subtle concerns by Bandura is the process of socializing. This is the process of inducing the society members to operate in socially acceptable ways. The socializing process is so important that it has a major effect on all kinds of behavior, including skills of technical nature. Most of the boys … that is expected of teenagers in all cultures. There are several categories of social conduct that bear wider import and relevance. The socialization process makes sure that children behave in a certain gender-acceptable……
References
References
Alexander Jr, R. (2010). The Impact of Poverty on African American Children in the Child Welfare and Juvenile Justice Systems. In Forum on Public Policy Online (Vol. 2010, No. 4). Oxford Round Table. 406 West Florida Avenue, Urbana, IL 61801.
Belgrave, F. Z., & Allison, K. W. (2009). African American psychology: From Africa to America. Los Angeles: Sage.
Brittian A. S. (2012). Understanding African American Adolescents\\\\\\' Identity Development: A Relational Developmental Systems Perspective. The Journal of black psychology, 38(2), 172–200. https://doi.org/10.1177/0095798411414570
Chávez, R. (2016). Psychosocial development factors associated with occupational and vocational identity between infancy and adolescence. Adolescent Research Review, 1(4), 307-327.
Crain, W. C. (2014). Theories of development: Concepts and applications. Harlow, Essex: Pearson.
Fernandes-Alcantara, A. L. (2018). Vulnerable Youth: Background and policies.Congressional Research Service
Newman, B. M., & Newman, P. R. (2015). Theories of human development. Psychology Press.
Reubins, B. M., &Reubins, M. S. (2014). Pioneers of child psychoanalysis: Influential theories and practices in healthy child development. London: Karnac.
Improve your studying and writing skills
We have over 150,000+ study documents to help you.
Sign Up for FREE
