Designs Essays (Examples)

Studyspark

Study Document Study Document

Integration Of Social Networking In Design Education In China

Pages: 3 (809 words) Sources: 1 Document Type:Article Review Document #:38182762

...Designs Article Summary
The study by Jiang, Tang, Peng and Liu (2018) looks at using social networks as a tool to facilitate collaboration among students and interaction between teachers and students in a Chinese high school. The investigations into the utility of social networks were conducted among various design and technology classrooms in high schools throughout China. Based on the findings, Jiang et al. (2018) were able to produce a theoretical framework for web-based design learning and teaching system in the style of social networking. They tested their framework and found that the most important features of the framework are its ability to facilitate innovation, collaboration, and interaction.
The researchers additionally “validated necessary techniques and design features required to make an education-related social networking site effective and affective for the students and teachers” (Jiang et al., 2018, p. 189). The overall finding was that social networking sites help to enhance the……

References

References

Jiang, H., Tang, M., Peng, X., & Liu, X. (2018). Learning design and technology through social networks for high school students in China. International Journal of Technology and Design Education, 28(1), 189-206.

Studyspark

Study Document Study Document

Design And Implementation Of Collaborative Care Model

Pages: 10 (2940 words) Sources: 5 Document Type:Essay Document #:59073521

...Designs Current Population
The population of the area comprises mostly of African Americans. The community is a low-income area and individuals who live here struggle to make ends meet. This makes it hard for them to access premium health care that is offered at private hospitals. Therefore, most of them have to rely on the community health center. Poor people have been associated with numerous chronic health problems that are as a result of their lifestyles and a lack of viable income. The community is underserved in terms of social amenities. Other structural challenges that are faced by the community is the reduced access to fresh foods, high density of fast food restaurants, and the area is not conducive for physical activity. This makes people have sedentary lifestyles that contribute towards them developing chronic diseases. Access to health care is reduced and the few who are able to access the community……

References

References

LaBelle, C. T., Han, S. C., Bergeron, A., & Samet, J. H. (2016). Office-based opioid treatment with buprenorphine (OBOT-B): statewide implementation of the Massachusetts collaborative care model in community health centers. Journal of substance abuse treatment, 60, 6-13.

Overbeck, G., Kousgaard, M. B., & Davidsen, A. S. (2018). The work and challenges of care managers in the implementation of collaborative care: A qualitative study. Journal of psychiatric and mental health nursing, 25(3), 167-175.

Sanchez, K. (2017). Collaborative care in real-world settings: barriers and opportunities for sustainability. Patient preference and adherence, 11, 71.

Smith, S. N., Almirall, D., Prenovost, K., Liebrecht, C., Kyle, J., Eisenberg, D., . . . Kilbourne, A. M. (2019). Change in Patient Outcomes After Augmenting a Low-level Implementation Strategy in Community Practices That are Slow to Adopt a Collaborative Chronic Care Model: A Cluster Randomized Implementation Trial. Medical Care.

Unützer, J., Harbin, H., Schoenbaum, M., & Druss, B. (2013). The collaborative care model: An approach for integrating physical and mental health care in Medicaid health homes. HEALTH HOME, Information Resource Center, 1-13.

Studyspark

Study Document Study Document

Swapping The Studio Based Pedagogy For Online Learning

Pages: 6 (1926 words) Sources: 5 Document Type:Research Paper Document #:33333539

...Designs Why to Adopt Pedagogy Based on Digital Online Interactions with Students
Introduction
With the arrival of the digital age has come a shift in the way information is pursued, transacted, shared, discussed, obtained, and processed. Students who have grown up in the digital age are digital natives and are more comfortable using digital technology than being without it. For design educators who are used to the studio-based pedagogy that has been in use for a century, shifting to embrace a digital-based pedagogy can seem like a transition that is too great of a leap for them to welcome. After all, the pedagogy of the studio-based design education has its own special uniqueness that cannot be replicated in a digitalized format. However, what design educators need to realize is that it is not about replication but rather it is about improving the pedagogy by way of innovation. The pedagogy of the……

References

References

Fleischmann, K. (2013). Big Bang Technology: What's Next in Design Education, Radical Innovation or Incremental Change?. Journal of Learning Design, 6(3), 1-17.

Justice, L. (2019). The Future of Design Education. Design Management Review, 30(1), 33-37.

Mayadas, A. F., Bourne, J., & Bacsich, P. (2009). Online education today.  Science, 323(5910), 85-89.

Souleles, N. (2015). Elearning in art and design: the elephant in the room. In 9th International Technology, Education and Development Conference (pp. 6659-6665).

Vaughan, S., Austerlitz, N., Blythman, M., Grove-White, A., Jones, B. A., Jones, C. A.,... & Shreeve, A. (2008). Mind the gap: Expectations, ambiguity and pedagogy within art and design higher education. In The student experience in art and design higher education: Drivers for change (pp. 125-148). Jill Rogers Associates Limited.

Studyspark

Study Document Study Document

Web 2 0 And Online Studio Education

Pages: 6 (1931 words) Sources: 5 Document Type:Research Paper Document #:53632130

...Designs Online Studio Education
The rise of Web 2.0 Technologies paves the way to a collaborative and interactive learning environment making the exchange of content and collaboration over the web (Loannao, 2018). The internet, since then, started becoming the reservoir of knowledge, giving free access to information and educational resources (Loannao, 2018). Because of these developments, online courses and online education began and were incorporated in different educational fields as the means of expanding knowledge and enhancing the learning procedure (Loannao, 2018). Studio-based learning is the practical education where the learning is done through doing, relying on the jury system for evaluating and assessing the student’s projects (Siddiqi, 2002). The entire course is designed in the traditional pedagogy.
Online Studio Education is more than just a different teacher and student interaction format as it involves consistency within the educational resources as all the students receive the consistent course material and access……

References

References

Bender, D. M. (2006). Using Online Education Technologies to Support Studio Instruction. Educational Technology and Society.

Kurt, S. (2009). An analytic study on the traditional studio environments and the use of the constructivist studio in the architectural design education. Procedia Social and Behavioral Sciences, 401-408.

Loannao, O. (2018). Opening up design studio education using blended and networked formats. International Journal of Educational Technology in Higher Education.

Nottingham, A. (2014). Reshaping design education: teaching graphic design online and onsite. The University of Melbourne.

Pasin, B. (2017). Rethinking the Design Studio-Centered Architectural Education. A Case Study at Schools of Architecture in Turkey. The Design Journal.

Siddiqi, A. A. (2002). ARCHITECTURAL DESIGN STUDIO PROJECTS AND THE CHARADES OF CURRICULUM. The 6th Saudi Engineering Conference, KFUPM. Architecture Department, College of Environmental Design, KFUPM Dhahran.

Studyspark

Study Document Study Document

MacBook Pro By Apple Inc Quality Management

Pages: 11 (3159 words) Sources: 5 Document Type:Essay Document #:17953236

… case of television, the various DFM guidelines taken into consideration for improving manufacturability include a reduction in the number of parts, developing products designs that are modular, usage of standard parts, ensuring that the designing and manufacturing product parts are multi-functional and also can be used for ……

References

References

Hill, C. W., Jones, G. R., & Schilling, M. A. (2014). Strategic management: theory: an integrated approach. Cengage Learning.

Panzarino, M. (2012). This is how Apple\\\\\\'s top-secret product development process works. The Next Web. Retrieved from:  https://thenextweb.com/apple/2012/01/24/this-is-how-apples-top-secret-product-development-process-works/ 

Interaction Design Foundation. (2020). Apple\\\\\\'s Product Development Process – Inside the World\\\\\\'s Greatest Design Organization. Retrieved from:  https://www.interaction-design.org/literature/article/apple-s-product-development-process-inside-the-world-s-greatest-design-organizatio " target="_blank" REL="NOFOLLOW">

Studyspark

Study Document Study Document

How Millon S Personality Theory Can Be Understood

Pages: 7 (2596 words) Sources: 12 Document Type:Essay Document #:95073083

… identified proportions of personality functioning and realignment according to factor evaluation of the personality lexicon qualities. The present system consists of 13 personality designs or kinds according to groups generally observed in a number of communities to varying degrees. The primary personality designs established by Millon had been all variants from the Passive, Active along with Pleasure-Pain proportions. Over his years of analysis, Millon has produced … the Passive, Active along with Pleasure-Pain proportions. Over his years of analysis, Millon has produced a powerful theoretical design composed of 13 personality designs. One of the biggest benefits of Millon's theoretical design is the development of an operationalized evaluation tool which will determine an individual's degree … Millon's theoretical design is the development of an operationalized evaluation tool which will determine an individual's degree of each one of the personality designs within this model (Huck, 1998).
Cloninger has created personality theory……

References

References

Pincus, A. L., & Krueger, R. F. (2015). Theodore Millon\\'s contributions to conceptualizing personality disorders. Journal of personality assessment, 97(6), 537-540.

Millon, T., Millon, C. M., Meagher, S. E., Grossman, S. D., & Ramnath, R. (2004). Personality disorders in modern life. John Wiley & Sons.

Rossi, G., & Derksen, J. (2015). International adaptations of the Millon Clinical Multiaxial Inventory: Construct validity and clinical applications. Journal of personality assessment, 97(6), 572-590.

O’Connor, B. P., & Dyce, J. A. (1998). A test of models of personality disorder configuration. Journal of Abnormal Psychology, 107(1), 3.

Lecic-Tosevski, D., Gavrilovic, J., Knezevic, G., & Priebe, S. (2003). Personality factors and posttraumatic stress: Associations in civilians one year after air attacks. Journal of Personality Disorders, 17, 537–549.

Strack, S., & Millon, T. (2007). Contributions to the dimensional assessment of personality disorders using Millon\\'s model and the Millon Clinical Multiaxial Inventory (MCMI–III). Journal of Personality Assessment, 89(1), 56-69.

Bajraktarov, S., Gudeva-Nikovska, D., Manuševa, N., & Arsova, S. (2017). Personality Characteristics as Predictive Factors for the Occurrence of Depressive Disorder. Open Access Macedonian Journal of Medical Sciences, 5(1), 48–53.  https://doi.org/10.3889/oamjms.2017.022 

Framingham, J. (2018). Millon Clinical Multiaxial Inventory (MCMI-III). Psych Central.

Studyspark

Study Document Study Document

Royale Racing RP16

Pages: 6 (1922 words) Sources: 7 Document Type:Essay Document #:41916637

...Designs The Impact of Royale Racing on Race Club Engineering
Introduction
Royale Racing was established in 1968 by Bob King in Great Britain. The company produced single seater race cars until 1987 when the company closed its production facility. King had had some experience in working on speedway cars in New Zealand in his youth and after returning to Great Britain he opened a car lot, selling road cars. His father owned a motor showroom, which is where King learned to take his interest in cars in the first place (Ward). Operating his own lot, he acquired a used Elva on a trade-in and kept it around with the intention of racing the car—but the car caught the attention of other consumers and because he had experience in the speedway, he found that he had a skill set that was in demand in a niche market in England. Thus, he soon……

References

Works Cited

1973 Royale RP16 Formula Ford.  https://bringatrailer.com/listing/1973-royale-rp16/ 

“About Royale Racing.” Royale FCS Competition Services.  http://www.racingcarsforsale.co.uk/frameset-royale.htm 

Brazilian Formula Ford.  http://www.driverdb.com/standings/152-1970/cars/ 

Lawrence, Paul. Nowhere to Hide: The Story of Royale Racing Cars. TFM Publishing, 2001.

“Royale.”  http://www.f3history.co.uk/Manufacturers/Royale/royale.htm?LMCL=nU3Mya 

Royale Race Tires. “About Us.” http://www.royaleracetires.com/about-us/

Ward, Ian. “Royale Racing.” The World of Automobiles, volume 17. Pennsylvania State University, 1974.

Studyspark

Study Document Study Document

Supply Chain Management In Canada

Pages: 11 (3384 words) Sources: 2 Document Type:Case Study Document #:46307784

… positive cash flow for a consistent number of years. It will put demand on the supply chain management team to develop increased tactical designs for shipping and to establish strong logistical relationships so that products are moving consistently and at a rate proportional to the production of ……

References

Bibliography

Channick, Robert. “Fallout from China Trade War,” Chicago Tribune, 2019.  https://www.chicagotribune.com/business/ct-biz-china-tariffs-illinois-impact-20190510-story.html 

Krebbler Furniture Case Study, Supply Chain Management Association. Digital File.

Studyspark

Study Document Study Document

Advantages And Disadvantages Of Interrelationships Between Organizational

Pages: 16 (4728 words) Sources: 28 Document Type:Essay Document #:81594345

...Designs 1. Advantages and Disadvantages of Interrelationships between Organizational Functions and Impact on Organisational Structure
Organizational Functions
The functions of an organization take into account the different aspects undertaken by the business including production or manufacturing, marketing, sales, accounting as well as research and development. In accordance to Sherman and Thompson (2019), the organizational structure delineates the relationship and interrelations between the functions of a business and ascertains the manner in which the chain of command operates through the various levels. The interrelationship between organizational functions and organizational structure is akin to a flow chart. This is in the sense that an entity can set up its business structure around the organizational functions. However, even if the entity fails to do so, the organizational functions and structure will have an impact on one another (Sherman and Thompson, 2019).
Functional Organizational Structure
A functional organizational structure creates distinct and separate departments. Plenty……

References

References

Air India. (2019). Board of Directors. Retrieved from:  http://www.airindia.in/board-of-directors.htm 

Aquinas, P. G. (2008). Organization structure and design. India: Excel Books India.

Burns, T., & Stalker, G. M. (2005). Mechanistic and organic systems. Organizational Behavior, 2, 214-25.

Choo, S., & Bowley, C. (2007). Emerald Article: Using training and development to affect job satisfaction. Journal of Small Business and Enterprise Development, 14(2),339 - 352.

Cichocki, P., & Irwin, C. (2014). Organization design: A guide to building effective organizations. Kogan Page Publishers.

Civil Aviation. (2019). About Us: Organizational Setup. Retrieved from:  http://www.civilaviation.gov.in/en/aboutus/orgsetup 

Cunliffe, A. L. (2008). Organization theory. New York: Sage.

Cunliffe, A. L., & Luhman, J. T. (2012). Key concepts in organization theory. New York: Sage.

Studyspark

Study Document Study Document

Competitive Advantage And Operations Management

Pages: 8 (2415 words) Sources: 6 Document Type:Research Paper Document #:99381670

… attributes, like being able to conduct the research I want to conduct, and to find the shoes I want once I decide what designs I favor. But I also want the experience of owning these shoes to be incredible, because of the investment that they represent. Credence ……

References

References

Deshmukh, G. & Das, R. (2012) Consumer buying behaviour for high involvement products. Asian Journal of Management. Vol. 3 (3) 153-157.

Halton, C. (2019) Credence good. Investopedia. Retrieved March 26, 2020 from https://www.investopedia.com/terms/c/credence-good.asp

Interbrand (2019) Best global brands. Interbrand Retrieved March 26, 2020 from https://www.interbrand.com/best-brands/best-global-brands/2019/ranking/

QSR (2017) The QSR Top 50. QSR Magazine. Retrieved March 26, 2020 from  https://www.qsrmagazine.com/content/qsr-50 

QuickMBA (2010) The value chain. QuickMBA.com. Retrieved March 26, 2020 from  http://www.quickmba.com/strategy/value-chain/ 

Zhang, B. (2018) The 10 best airlines to fly in North America. Business Insider. Retrieved March 26, 2020 from  https://www.businessinsider.com/best-airlines-in-north-america-for-2018-skytrax-2018-10 

Improve your studying and writing skills

We have over 150,000+ study documents to help you.

Join thousands of other students and

"spark your studies".